Batik

Batik is the original culture of indonesia। So that, we are as the young generation should keep and apreciate it. In Indonesia there are many kind of batik.beside that there are also many technical of making batik. For example manually ( canting ), cap, and etc. Now, we will present about production of batik starting from making pattern, CAP tool, and CAP processing.

•The basic of the producing for making this batik arebfor compliting our value in practicel exampminationj anf also for reserving our culture , batik.

One point that we should understand that batiks are heritage from progenitor।

The first step is we must cut the almini with the same size. The size are 2,8cm for the body and 0,3cm for the feet. So the totally height are 3,1 cm. Then we must make a line with a cutter on the almini, and pull the almini slowly to release.

The second is making design statring from draw the thin board. Then cut the thin board based to the form.

•After making the design we can make the feet of the design. We can set the measure then cut it become a foot.

•Almini forming is strating by hollowing based of the design .

•We use Big spidol,Botle,hand made and etc

•The five step is holling , strating by using screw driver,We holl the board based of the design.Before it we must choose the measure।

•The almini that we had formed before now we can insert it to the holl on the board.dint forget atention how float the design is.

• make it strong by pressing it with the board.

•And than we pair the arm to the thick board.

•After that we getter the design board and thick board.

•Make it strong by nails।

•The first we cook malam klowong on the pan

Until liquid and rady to use . After that we put the stamp on the hot pan.

Before it we must prepare colth on the spon.

The second step we take our stamp from the pan.we press our stamp on the cloth.

Try again until finish.